When it comes to Affinity Laws, We’re Big Fans

FanInfinityLawsChart250

A couple of my good friends from Chatsworth Products, Inc. (and brilliant guys, if I do say so myself) sent me this very interesting article centering on fan affinity laws, that they collaborated on just for our data center blog. Their names (and titles, so you know who they are, too) are Jeff Cihocki, eContent Specialist and Fernando Reyna, RCDD and Senior Technical Support Specialist. Here is what they asked me to share:

Now that summer has officially arrived, things are heating up – and when things heat up, fan use kicks into high gear.

Of course, here in the data center world, we aren’t talking about your usual box fan propped up in a brownstone window – we’re talking server fans, industrial sized CRACs, CRAHs and every other kind of swirling, whirling apparatus designed to keep our data processing at a comfortable temperature – even as the outside world bakes and broils.

To that end, fan affinity laws can provide a simple yet effective way to help reduce power consumption in the data center when it comes to the operating set points of your cooling equipment. Take this explanation into consideration:

If you have a data center that needs 10,000 CFM of cooling, you might have an air conditioner that provides 10,000CFM at 100 percent load, and another one just like it turned off for redundancy. The fan affinity law here essentially operates like the cube effect – instead of running one A/C at 100 percent capacity, you could run them both at 50 percent load. This means that you’d still have the necessary 10,000 CFM with each A/C providing 5,000 CFM. Logically, it would seem that running one at 50% would reduce the energy in half, right? That’s where the fan affinity law comes into play. Instead of x .5 it becomes .5 x .5 x .5 = .125 or 1/8. So with each running at 50 percent load, instead of using 50 percent of the energy, we’re only using 25 percent of the energy it takes to run one A/C at full capacity!

When you realize that most traditional data centers may be over provisioned for two to three times normal demand, fan affinity laws begin to look like an awfully attractive solution – especially when you couple this idea with CPI’s Passive Cooling® Solutions. With passive cooling, you only need to provide what your demand is 1X. So while there’s always savings to be had, with fan affinity laws working hand in hand with passive cooling is considerable more efficient, you could be paying as little as 25% of 1/3 of what your current A/C costs are!

We’d say savings like that go a long way towards making your summer extra cool.

No Comments, Yet.

Leave a Reply

Your email address will not be published. Required fields are marked *


*